FLU-206A Online Fluoride Ion Sensor

FLU-206A integrated on-line fluoride ion sensor uses a solid membrane ion-selective electrode for testing free fluoride ions in water with temperature compensation to ensure fast, simple, accurate and economical testing. The technical parameters, communication protocols, and maintenance of the fluoride ion sensor are described in detail in this manual. Signal output: RS-485 bus (Modbus/RTU) protocol, convenient to connect to PLC, DCS, industrial control computer, general controller, paperless recording instrument or touch screen and other third-party equipment. The patented fluoride ion probe, the internal reference solution oozes extremely slowly from the microporous salt bridge under the pressure of at least 100KPa (1Bar). Such a reference system is very stable and has a longer electrode life than conventional industrial electrodes. Easy to install: 3/4 inch NPT pipe thread for easy submersible installation or installation in pipes and tanks. IP68 protection level.

Product Parameters

Model FLU-206A
Measuring range 0~100mg/L
Resolution 0.01mg/L
Accuracy ±10% or ±1mg/L,±0.5℃
Working temp 0~40℃
Working pressure <0.1MPa
pH range of the medium 5~8 pH
Temperature compensation Automatic temperature compensation (Pt1000)
Power supply 12~24VDC
Signal output RS-485 bus, Modbus/RTU protocol
Wetted material  POM
Installation method 3/4"NPT tube thread,immersion mounting
Cable length 5 meters, can be customized
Calibration method Two-point calibration
Power consumption 0.2W@12V
Protection grade IP68