NON-406-S Online Nitrate Nitrogen Sensor

NON-406S integrated online nitrate nitrogen sensor is fabricated using a PVC membrane-based nitrate ion selective electrode for testing nitrate ion content in water with temperature compensation to ensure fast, simple, accurate and economical testing. The technical parameters, maintenance and communication protocols of the nitrate nitrogen sensor are described in detail in this user manual. Signal output: RS-485 bus, Modbus/RTU protocol, convenient to connect to PLC, DCS, industrial control computer, general controller, paperless recording instrument or touch screen and other third-party equipment. The patented nitrate ion probe, the internal reference solution oozes extremely slowly from the microporous salt bridge at a pressure of at least 100 KPa (1 Bar). Such a reference system is very stable and has a longer electrode life than conventional industrial electrodes. The membrane head is replaceable, lower the cost. Easy to install: 3/4 NPT thread (pipe thread) for easy submersible installation or installation in pipes and tanks. IP68 protection level.
Messages

Product Parameters

Model

NON-406-S

Measuring range and
Resolution

0~100.00mg/L

0.01mg/L

0~1000.0mg/L

0.1mg/L

Accuracy

±10% or ±2mg/L,±0.5℃

Working temperature

0~40℃

Working pressure

<0.1MPa

Medium PH range

2.5~11pH

Temperature compensation

Temperature compensation (Pt1000)

Power supply

12~24VDC

Signal output

RS-485 & 4-20mA

Wetted material

PVC and POM

Installation

3/4NPT thread, immersion installation

Cable length

5 meters, can be customized

Calibration

Two-point calibration

Power consumption

0.2W@12V

Protection grade

IP68