NHN-406-S Online Ammonia Nitrogen Sensor

NHN-406 integrated online ammonia nitrogen sensor is fabricated using a PVC membrane-based ammonium ion selective electrode for testing ammonium ion content in water with temperature compensation to ensure fast, simple, accurate and economical testing. The technical parameters, maintenance and communication protocols of the ammonia nitrogen sensor are described in detail in this user manual. Signal output: RS-485 bus, Modbus/RTU protocol, convenient to connect to PLC, DCS, industrial control computer, general controller, paperless recording instrument or touch screen and other third-party equipment. The patented ammonium ion probe, the internal reference solution oozes extremely slowly from the microporous salt bridge at a pressure of at least 100 KPa (1 Bar). Such a reference system is very stable and has a longer electrode life than conventional industrial electrodes.  Easy to install: 3/4 NPT thread (pipe thread) for easy submersible installation or installation in pipes and tanks. IP68 protection level.
Messages

Product Parameters

Model

NHN-406-S

Measuring range and
Resolution

0~100.00mg/L

0.01mg/L

0~1000.0mg/L

0.1mg/L

Accuracy

±10% or ±1mg/L,±0.5℃

Working temperature

-5~40℃

Working pressure

0~40℃,<0.1MPa

Medium PH range

4~10 pH

Temperature compensation

Temperature compensation (Pt1000)

Power supply

12~24VDC

Signal output

RS-485 & 4-20mA

Wetted material

POM and 316L stainless steel

Installation

3/4NPT thread, immersion installation

Cable length

5 meters, can be customized

Calibration

Two-point calibration

Power consumption

0.2W@12V

Protection grade

IP68