CLI-206A Online Chlorine Ion Sensor
The CLI-206A integrated online chloride ion sensor USES an ion-selective electrode with a solid membrane for testing free chlorine ions in water, making it fast, simple, accurate and economical.In this manual, the technical parameters, communication protocol, operation and maintenance of the chloride ion sensor are introduced in detail.
Signal output: RS-485 bus, Modbus/RTU protocol, easy to connect to PLC, DCS, industrial control computer, general controller, paperless recording instrument or touch screen and other third-party devices.
The patented chloride ion electrode, with an internal reference fluid at a pressure of at least 100KPa (1Bar), slowly seeps out of the microporous salt bridge.The reference system is very stable and the electrode life is longer than that of ordinary industrial electrodes.
Easy to install: 3/4-inch NPT threads for submerged installation or installation in piping and tanks.
IP68 protection grade.
Messages
Product Parameters
| Model | CLI-206A | |
| Measuring range and Resolution | 0～3500mg/L | 0.1mg/L |
| 0～35000mg/L | 1mg/L | |
| Precision | ±5%，±0.5℃ | |
| Working temperature | 0～40℃ | |
| Working pressure | ＜0.1MPa | |
| pH range of the medium | 2～12pH | |
| Temperature compensation | Automatic temperature compensation (Pt1000) | |
| Power supply | 12～24VDC | |
| Signal output | RS-485 bus, Modbus/RTU protocol | |
| Material | POM | |
| Mounting method | Immersion mounting, 3/4 NPT thread | |
| Cable length | 5 meters, other lengths can be customized | |
| Calibration | Two-point calibration | |
| Power consumption | 0.2W@12V | |
| Protection grade | IP68 | |
